1/12 Scale Ceiling Lamps

Each of CK3723 - CK3726 lamps come with a milled out ceiling plate and plug-in adapter. Use of this adapter creates a fixture that is both plug in and flush to the ceiling.

CK3716 Large Ceiling Lamp w/Ornamental Shade

CK3716 Large Ceiling Lamp w/Ornamental Shade

Height: 3/4"
Shade Diameter: 1-1/2"

CK3716

CK3717 Ceiling Lamp w/Removable Frosted Shade

Height: 5/8"
Shade Diameter: 1"
Ceiling Plate Diameter: 9/16"
Bulb: CK1010-29
Compatible with CK804-2 adapter

CK3717

CK3718 Ceiling Lamp w/Removable Frosted Globe

Height: 3/4"
Globe Diameter: 1/2"
Ceiling Plate Diameter: 9/16"
Bulb: CK1010-29
Compatible with CK804-1 adapter

CK3718

CK3719 Fluted Shade Ceiling Lamp

Height: 1"
Shade Diameter: 3/4"
Ceiling Plate Diameter: 1/2"
Bulb: CK1010-29
Compatible with CK804-1 adapter

CK3719

CK3720 Tulip Shade Ceiling Lamp

Height: 3/4"
Shade Diameter: 1/2"
Ceiling Plate Diameter: 1/2"
Bulb: CK1010-29
Compatible with CK804-1 adapter

CK3720

CK3721 Bar Light

Height: 5/16"
Shade Diameter: 1-7/16"

CK3721

CK3722 Small Ceiling Lamp w/Removable Ornamental Shade

Height: 3/4"
Shade Diameter: 1"
Ceiling Plate Diameter: 9/16"
Bulb: CK1010-29
Compatible with CK804-2 adapter

CK3722

CK3723 Ornate Iron Ceiling Lamp

Click to enlarge

Height: 1"
Shade Diameter: 1"
Ceiling Plate Diameter: 5/8"
Bulb: CK1010-7
Free adapter included

CK3723

CK3724 Scrolled Iron Ceiling Lamp

Click to enlarge

Height: 1-1/8"
Shade Diameter: 1"
Ceiling Plate Diameter: 5/8"
Bulb: CK1010-29
Free adapter included

CK3724

CK3725 Black Star Burst Ceiling Lamp

Click to enlarge

Height: 1"
Globe Diameter: 11/16"
Ceiling Plate Diameter: 11/16"
Bulb: CK1010-29
Free adapter included

CK3725

CK3726 White Star Burst Ceiling Lamp

Click to enlarge

Height: 1"
Globe Diameter: 11/16"
Ceiling Plate Diameter: 11/16"
Bulb: CK1010-29
Free adapter included

CK3726

CK512 Plug-In Light

The CK512 light fixture provides an easy method of installing an authentic-looking incandescent ceiling light. Using our unique eyelet and plug combination, this light may be plugged into a tape run wherever a bare bulb look is desired. Ideal for hallways, closets, attics and storage areas.

Bulb measures approx. 7/32" in diameter and draws 85 ma at 12 volts. Detailed installation instructions included with each package.

CK512

CK500 Ceiling Fixture Kit

The CK500 provides a fast and economical method of direct installation at any number of key ceiling and wall locations throughout the house.

Installation consists of making tape run holes with either a push pin or CK1025 bit, inserting the bulb wires into the copper ribbon holes, securing in place with 1/8" brass brads, and attaching the "porcelain" ceiling plate with epoxy or glue. (The entire installation may be accomplished after painting or wallpapering for optimum aesthetic appeal.) This item presents a very low profile appearance and consists of a "porcelain"ceiling plate, 1/8" brads, bulb and instructions.

CK500

CK502 and CK503 Ceiling Fixture Kit

The CK502 and CK503 kits employ round pea bulbs to achieve a realistic incandescent bulb look. Bulb wires are pulled through a hole behind the fixture and attached to the tape run on the opposite side of the wall or on the floor above.

Ceiling Shade Kits

These ceiling shade kits provide a means of creating an attractive lighting scheme at minimum cost. The installation may be accomplished within a matter of minutes and consists of simply bradding in the supplied 12-volt bulb and placing the ceiling shade over the bulb. (The shade may be secured firmly in place to the ceiling with a small amount of fast-drying adhesive.) The entire installation may be made even after the room has been painted or wallpapered to achieve a maximum degree of realism. Compatible with CK804-3 adapter.